Common problems that may arise from the microwaves and their solutions.
When it comes to nowadays modern kitchen ; microwave is one of essential thing . It not only saaves the time in kitchen but also make the food tasty and baked it fast . But as other electronic tools get damaged , it is also prone to damage.The knowledge of the common issues and how to solve them will help save much time, money, and frustration. Thus, this article will try to address some of the most common microwave problems and their solutions.
1.Microwave not heating
The most frequent trouble in a microwave oven is when the appliance is turned on, the food does not get heated.
Reasons:
- Damaged Magnetron: When there is cooking or re-heating, magnetron generates the power to heat up.
- Diode burnt: the burnt diode will not let the proper amount of power go to the magnetron.
- Burnt high voltage capacitor: the electrical energy that heats up the contents supplied via the high voltage capacitor.
- Professional Fix: Replacing a magnetron or any other high-voltage component is dangerous. The best thing is to call an expert serviceman for it.
- Simple Tests: Check if your microwave is plugged well into a power source that works well and its door is properly closed.
2. Microwave turnable won't turn
- This can cause a bad heating distribution to your foods.
Causes:
- Motor of the turntable has burnt out or broken down.
- Turntable is out of line or dirty: Food particles are preventing the turntable from turning.
Solutions:
- Clean the Plate and Roller Ring: Take away the turntable and roller ring, clean them, and they should be able to turn.
- Check and Replace the Motor: If cleaning will not work a service technician can have your motor checked for you.
3. Microwave creating weird noises
Such noises like grinding or buzzing usually come with mechanical or electrical issues.
- Faulty turntable motor: A worn-out motor can produce grinding noises
- Faulty magnetron: A faulty magnetron can buzz.
- Loose parts: Internal parts can come loose over time.
Remedies:
- Tighten Loose Parts: If competent, pry open the microwave casing and tighten loose screws.
- Professional Diagnosis: A buzzing magnetron or grinding motor needs to be diagnosed by a repair technicia
4. Microwave buttons not working
Sometimes, the control panel stops working.
Possible Causes:
Faulty control panel: The touchpad or control board is faulty.Moisture or dirt accumulation: Dust may jam and even disable the proper functioning of buttons
Solution
- Clean Control Panel: Damp and soft cloth touching touchpad
- Reset Microwave: Unplug it and keep it idle for some hours
- Professional fix: In case of any remedy, which does not work.
5. Microwave doors won't latch or close
A microwaves microwave, which may not lock the door; may also not turn it on for operations. What could be causing it
- Damaged latch: Latch is possibly out, or even broken
- Faulty door switch: It will not recognize that the door is closed.
Solutions
- Check the Latch: In case it’s damaged, just adjust or replace it.
- Door Switch Replacement: This might need professional help
6. Microwave throws sparks (Arcing)
Sparks in a microwave can be scary, dangerous, too.
Possible Causes:
- Inside it has metal pieces: Foil or metal instruments cause sparks.
- Damaged waveguide cover: This is the cover which covers the inside of the microwave.
- Faulty rack support: If your microwave has a rack, then burnt supports can cause sparks in the microwave.
Remedies:
- Remove metallic objects: No metallic object is permitted inside the microwave.
- Check and Replace the Waveguide Cover: If the waveguide cover is burnt or damaged, replace it
7.Microwave stops at cooking cycle
This will stop the cooking and may also point to some other thing.
Causes
- Overheating: The microwave automatically turns off due to overheating
- Bad door switch: Sometimes door switch fails and it may cause some problem in microwave working.
- Loose wiring: When the connection of the power line to the appliance becomes loose, then there will be an inappropriate distribution of electricity.
Solution
- Let it cool first: Unplug it in case it has overheated then let the microwave cool down.
- Check the Door Switch: In case it did not latch right.
- Call a Technician: if it’s an electrical call the technician
Preventive maintainance tips
The following simple microwave maintenance tips simply to avoid problems with microwaves,
- Inner Cleaning: Dry spills and splatters before they build up.
- Use of Microwave-Safe Containers: Prevent the use of metallic objects. Also, only microwave-safe plastics should be utilized.
Conclusion
Some might appear easier to take on as others, while for others you will need some sort of experience as a professional. Every time you encounter problems concerning electricity or have noticed elements in faults or appear chronic do not try and find a solution. Seek an approach by the approach of professional and certified microwave services for a safe and efficient service.
