1. Stay Calm and Identify the Problem
When your geyser stops working, the first thing is to stay calm. Take a few minutes to observe the problem. Ask yourself the following questions:

Is there no hot water coming out at all?
Is the water lukewarm or not as hot as usual?
Is there any unusual noise or smell coming from the geyser?
Is there a visible leak?

Understanding the geyser issues will help you decide whether it’s something simple you can fix or if you need to call a professional.

2. Check the power supply
One of the most common Geyser issues collapses is a matter of power. If your gear is electric, make sure the power supply works:

Check the power switch: Make sure the circuit of the geyser does not crash. Reset it if necessary.
Inspect The power plug & cord: Make sure there is no loss.
Test the power: To see if it, try another electrical equipment in the same outlet whether it works.
If the power is nice, then go to the next step.

3. Observe thermostat settings
Sometimes a simple case like the wrong thermostat settings can be a criminal. If the thermostat is very low, the water is not hot enough. Most of the geyser has a disc or control panel where you can adjust the temperature. Try to increase the temperature setting to see if this problem is solved.

Be careful not to put the temperature too much, as it can be a safety risk.

4. Check for leakage

There is another common problem with Leak Geysers, especially as age. A leaked Geyser can be the result of either deficient valves, cracked tanks or damaged pipes. If you look at the water collecting around the bottom of your geyser, the time has come to inspect it further.

Close the geysers: Disconnect the power and water supply to avoid electrical hazards or further damage.
Look for the visual leak: For any leakage signal, check the joints, valves and pipes around the geyser.
Check the tank: A crack in the tank usually requires a professional assessment and may claim compensation.

5. Flush the tank

Mineral build-up can affect the performance of a geyser, especially in areas of hard water. Depression can accumulate at the bottom of the tank, causing disabled people and even injury over time. To fix it:

Close power supply and water supply.

Empty the tank: Attach a hose to the drain valve and let the water come out. This process can take several minutes.

Flush the tank: You can use a pipe cleaner or water filter to remove any remaining mineral deposits inside the tank.
Rinse your geyser once every 6 months can help increase life.

6. Check the Heating Element
If the water isn’t heating up as expected, the heating element might be faulty. The element is responsible for warming up the water inside the tank, and if it stops working, the geyser won’t function correctly. Replacing a damaged heating element may require professional help, but you can check the element by:

Testing the element: If you have a multimeter, check the element’s resistance. If it shows no continuity, the element is broken.
Look for signs of corrosion: A corroded element needs replacing.

7. Consider professional help
If the problem is not solved after following the steps above, or if you are not comfortable doing these checks yourself, it is time to call a professional. A certified plumber or geyser technician will be able to diagnose the problem and provide the necessary repair or replacement.

8. Stop future problems
To avoid the collapse of future geysers, it is necessary to maintain the device correctly:

Plan regular maintenance: Tested the geyser once a year to ensure that everything works properly.
Install a pressure relief valve: If your geyser does not already have one, installing a pressure relief valve may help prevent leaks and blasting.

Keep an eye on the thermostat: Check and adjust the thermostat regularly to maintain the correct temperature.

conclusion
A degradation of the appliances does not always mean that you need to change the entire device. If necessary, someone checks by calling yourself or a professional, you can save money and restore hot water quickly. Always remember to prioritize safety, and if you are ever unsure of dealing with electric or plumbing problems, do not hesitate to call a professional. When you take care of your geyser issues with regular maintenance, it will run smoothly in the years to come.